Shaking And Replacing Ink Cartridges; Shaking; Replacement Procedure - Epson SureColor SC-S70600 series Operator's Manual

Hide thumbs Also See for SureColor SC-S70600 series:
Table of Contents

Advertisement

EPSON SC-S70600 series/SC-S50600 series
Shaking and Replacing
Ink Cartridges

Shaking

As shown in the illustration, hold the cartridge
horizontally and shake it in both directions about 5 cm
15 times in 5 seconds.
For spot color inks, Orange, and Orange Plus inks, when
replacing the ink, shake them about 50 times in
15 seconds.
When replacing a cartridge, remove it from the bag and
then shake it.
c
Important:
Due to ink characteristics, the ink cartridges of this
printer are prone to sedimentation (components
settling to the bottom of the liquid). Shake a new ink
cartridge before installing it. After installing it in
the printer, remove and shake it periodically.

Replacement procedure

If an ink low warning is displayed, replace as soon as
possible. If one of the installed ink cartridges is
expended, printing cannot be performed.
c
Important:
If
Ink Cartridge Expended appears when using
spot color inks, replace the old ink cartridge with a
new one promptly. If the ink expended warning is
left displayed, the print head or other parts may be
damaged.
Operator's Guide
Maintenance
If an ink cartridge is expended while printing, you can
continue printing after replacing the ink cartridge.
However, when replacing ink during a print job, you
may see a difference in color depending on the drying
conditions.
The following procedure explains how to replace an ink
cartridge and a cleaning cartridge.
c
Important:
Epson recommends the use of genuine Epson ink
cartridges. Epson cannot guarantee the quality or
reliability of non-genuine ink. The use of
non-genuine ink may cause damage that is not
covered by Epson's warranties, and under certain
circumstances, may cause erratic printer behavior.
Information about non-genuine ink levels may not
be displayed, and use of non-genuine ink is recorded
for possible use in service support.
A
Make sure the printer is on.
B
Lift the lock lever for the cartridge you intend to
replace.
C
Insert a finger into the depression on the top of
the cartridge and pull the cartridge straight
toward you.
44

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents