IBM Ultrastar 36LZX Specifications page 72

8.5.1.4 Inquiry data format - EVPD = 1 - Page Code = 80h
Byte
7 6
0 Qualifier = 0
1
2
3
4-19
Figure 61. INQUIRY DATA - EVPD = 1 (Page Code = 80h)
Ÿ
Qualifier is set to zero to indicate that the LUN specified in the Command Block is currently
supported.
Ÿ
Peripheral Device Type is set to zero to indicate that the device is Direct Access.
Ÿ
Page Code is set to 80h, and this field contains the same value as in the page code field of the
INQUIRY command descriptor block.
Ÿ
Page length is set to 16, and this field specifies the length of the following page data.
Ÿ
Serial Number gives the drive serial number right aligned.
Bit
5 4 3
Peripheral Device Type = 0
Page Code = 80h
Reserved = 0
Page Length = 16 (10h)
Serial Number (ASCII)
Ultrastar 36LZX hard disk drive specifications
2 1 0
72