IBM Ultrastar 36LZX Specifications page 219

Command (w/Option)
Request Sense
Inquiry (EVPD=0)
Inquiry (EVPD=1)
Test Unit Ready
Unit Start/Stop
(Start)
Unit Start/Stop
(Stop)
Other Commands
Figure 182. Spindle Motor Degraded Mode - Spindle Stopped by Unit Stop Command
Response
Executed. The Target may return Sense Key 02h (Not
Ready) ASC/ASCQ 0402h (Initialize Command Required)
Executed
Executed
Executed and Check Condition is returned with Sense Key
02h (Not Ready) ASC/ASCQ 0402h (Initialize Command
Required)
Executed
- Success: Good Status is returned. Motor Degraded Mode
is cleared
- Spindle Motor Start Failure: Check Condition with
Sense Key 02h (Not Ready) ASC/ASCQ 0400h (Start Spindle
Motor Fail)
- Self Configuration Failure: Check Condition with
Sense Key 02h (Not Ready) ASC/ASCQ 4080h (Diag Fail-
Bring up Fail)
Sense Key 02h (Not Ready) ASC/ASCQ 4085h (Diag Fail-RAM
code NOT load)
Executed. Good Status is returned.
Mode is NOT cleared
Not Executed. Check Condition Status is returned with
Sense Key 02h (Not Ready) ASC/ASCQ 0402h (Initialize
Command Required)
Ultrastar 36LZX hard disk drive specifications
219
Motor Degraded