IBM Ultrastar 36LZX Specifications page 35

7.2.1.3 Position #7-8 on J6
Disable SCSI Parity Check
.
Installing a jumper shunt disables SCSI Parity checking
7.2.1.4 Position #9-10 on J6
Enable TI-SDTR
Installing a shunt jumper enables Target Initiated Synchronous Data Transfer Request Negotiation.
7.2.1.5 Position #11-12 on J6
Disable Unit Attention
Installing a shunt jumper enables control of UAI (Unit Attention Inhibit) bit in Mode Page 0.
7.2.1.6 Position #13-14 on J6
Reserved.
Ultrastar 36LZX hard disk drive specifications
35