IBM Ultrastar 36LZX Specifications page 111

PER DTE DCR
0 0 0
1 0 0
0 0 1
1 0 1
Ÿ Verify Retry Count sets a limit on the amount of verify recovery procedure (VRP) passes the Target
attempts when recovering verify errors. The Verify Retry Count of one causes the Target to attempt
up to one VRP pass per command when a medium error occurs during a verify operation. Only
values of 0h and 01h are valid. The value of 0h disables all recovery.
Ÿ Verify Correction Span field specifies the size in bits of the largest data error burst for which data
error correction may be attempted. The field may be set to any value but the drive will not use
off-line correction during verify operations.
DESCRIPTION
Soft errors are not reported. ECC is applied to recover the data.
Soft errors are reported. ECC is applied to recover the data.
Soft errors are not reported. ECC is not used to recover the data.
Soft errors are reported. ECC is not used to recover the data.
Ultrastar 36LZX hard disk drive specifications
111