IBM Ultrastar 36LZX Specifications page 237

Key Code Qual
2h 04h 00h
2h 04h 01h
2h 04h 02h
2h 04h 04h
2h 04h 09h
2h 31h 00h
2h 40h 80h
2h 40h 85h
3h 03h 00h
3h 10h 00h
3h 11h 00h
3h 14h 01h
3h 16h 00h
3h 19h 00h
3h 31h 00h
4h 01h 00h
4h 02h 00h
4h 03h 00h
4h 11h 00h
4h 19h 00h
4h 32h 00h
4h 3Eh 03h
4h 3Eh 04h
4h 40h 80h
4h 40h 85h
4h 44h 00h
4h 81h 00h
4h 82h 00h
Figure 179. Sense Key / Sense Code / Qualifier combinations continued on next page.
Description
Not ready. Start spindle motor fail.
Not ready. In process of becoming ready.
Not ready. Initializing command required. (Start Unit)
Not ready. Format in progress.
Not ready. Self-test in progress.
Not ready. Medium format corrupted.
Diag Fall - Bring-Up Fail.
Diag Fall - RAM Microcode Not Loaded.
Medium error. Write fault.
Medium error. ID CRC error.
Medium error. Unrecovered read error.
Medium error. Record not found.
Medium error. Data synchronization mark error. (DAM error)
Medium error. Defect list error. A defect list error occurs when a data error is
detected while reading the manufacturing defect list or while reading or writing
the grown defect list.
Medium error. Medium format corrupted.
Hardware error. No index or sector.
Hardware error. No seek complete.
Hardware error. Write fault.
Hardware error. Unrecovered read error in reserved area.
Hardware error. Defect list error.
Hardware error. No defect spare location available. A "no defect spare
location available sense code" indicates that the Reassign Block command
can not proceed the process because all spare sectors have been used, or it
will exceed implementation limitation of defect handling of the file.
Hardware error. Self-test failed.
Hardware error. Unable to update self-test.
Degrade Mode. Diagnostic Fail. Configuration sector valid check fail.
Reserved area sector valid check fail.
Degrade Mode. RAM Microcode Not Loaded.
Hardware error. Buffer CRC Error on Write.
Hardware error. Internal logic error.
Hardware error. Command timeout.
Ultrastar 36LZX hard disk drive specifications
237