IBM Ultrastar 36LZX Specifications page 239

Key Code Qual
Bh 1Bh 00h
Bh 25h 00h
Bh 3Fh 00h
Bh 43h 00h
Bh 44h 00h
Bh 45h 00h
Bh 47h 00h
Bh 48h 00h
Bh 49h 00h
Bh 4Eh 00h
Figure 279. concluded.
Description
Aborted command. Synchronous data transfer error. (Extra ack detected)
Aborted command. Unsupported LUN. The drive supports LUN 0 only
Aborted command. Echo buffer overwritten
Aborted command. Message reject error. A message reject error occurs when
an inappropriate or unexpected message reject is received from the initiator or
the initiator rejects a message twice
Aborted command. Buffer CRC Error on Read
Aborted command. Selection/Reselection failed. A selection/reselection error
occurs when the initiator fails to respond to a reselection within 250 milli-
seconds after the drive starts reselection. The reselection is attempted a
second time before setting selection/reselection failed sense code
Aborted command. SCSI parity error
Aborted command. Initiator detected error message received. An initiator
detected error occurs when the initiator detects an error, sends a message to
retry, detects the error again, and sends the retry message a second time. The
drive then sets check condition status with Initiator Detected Error
Aborted command. Inappropriate/illegal message. An inappropriate or illegal
message occurs when the initiator sent a message that either is not supported
or is not in a logical sequence
Aborted command. Overlapped commands attempted
Ultrastar 36LZX hard disk drive specifications
239