Problem solving guide
Problem
The dishes are not hot
enough.
Problem
The crockery is too hot. The operating mode for heating plates/dishes or
Noises during operation The noise is from the fan which circulates warm air
28
Cause and remedy
The operating mode for heating plates/dishes was
not selected.
Select the correct operating mode.
The temperature setting is too low.
Select a higher temperature.
The vents are covered up.
Make sure that the air can circulate.
The crockery has not been allowed to heat up for a
sufficiently long time.
The heating time for crockery is affected by a
number of factors (see "Heating crockery").
Cause and remedy
cups/glasses was not selected.
Select the correct operating mode.
The temperature setting is too high.
Select a lower temperature.
for even heat distribution. The fan runs at intervals in
the "Keeping food warm" and "Low temperature
cooking" operating modes. This is not a fault!