Nameplate Information - Goulds Pumps 3996 Installation, Operation And Maintenance Instructions

NAMEPLATE INFORMATION

Every pump has two Goulds nameplates that provide
information about the pump. The tags are located on the
casing and bearing frame.
Description
Pump Casing Tag - provides information
about the pump's hydraulic
characteristics. Note the format of the
pump size: Discharge x Suction - Nominal
maximum Impeller Diameter in inches.
(Example: 2x3-8)
(Figs. 4 & 5).
Bearing Frame Tag - provides
information on the lubrication system used
(Fig. 6).
ATEX Tag - If applicable, your pump
unit may have the following ATEX tag
affixed to the pump and/or baseplate. See
the Safety section for a description of the
symbols and codes
(Fig. 7).
3996 IOM 9/2010
When ordering spare parts, you will need to identify
pump model, size, serial number, and the item number of
required parts. Information can be taken from the pump
casing tag. Item numbers can be found in this manual.
Fig. No.
Fig. 4
English
Fig. 5
Metric
Fig. 6
Fig. 7
Example
2
15