Removing And Installing Hardware; Front Bezel - Lenovo ThinkServer TS150 User Manual And Hardware Maintenance Manual

5. Remove the two thumbscrews, press the cover-release button, and slide the cover backward to remove
the server cover.
Figure 11. Removing the server cover
Attention: For proper cooling and airflow, install the server cover before turning on the server. Operating the
server with the server cover removed might damage server components.

Removing and installing hardware

This topic provides instructions on how to remove and install hardware for your server. You can expand the
capabilities of your server and maintain your server by installing or replacing hardware devices.
If you are handling a server option, refer to the appropriate instructions in this manual along with the
instructions that come with the option.
Notes:
• Use only parts provided by Lenovo.
• Depending on your server model, your server might look slightly different from the illustrations in this
chapter.

Front bezel

• "Removing the front bezel" on page 42
• "Installing the front bezel" on page 43
Removing the front bezel
To remove the front bezel, do the following:
1. Prepare your server. See "Preparing your server and removing the server cover" on page 41.
42
ThinkServer TS150 User Guide and Hardware Maintenance Manual
®