Configuring The Tpm Function; Exiting The Setup Utility Program; Updating Or Recovering The Bios - Lenovo ThinkServer TS150 User Manual And Hardware Maintenance Manual

2. When you see the logo screen, press F12 to display the boot menu. The boot device selection
window opens.
3. In the boot device selection window, use the up and down arrow keys on the keyboard to switch
between the selections. Press Enter to select the device of your choice. Then, the server will start
up from the selected device.
• To view or permanently change the configured startup device sequence, do the following:
1. Start the Setup Utility program. See "Starting the Setup Utility program" on page 25.
2. On the Startup menu, follow the instructions on the screen to select devices for the Primary Startup
Sequence, the Automatic Startup Sequence, and the Error Startup Sequence.
3. Press F10 to save settings and exit the Setup Utility program. The server will follow the startup device
sequence you have set each time you turn on the server.

Configuring the TPM function

The TPM chip is integrated on the system board and works as a hardware security solution to help you
to encrypt data and protect the server.
To enable the TPM function in the Setup Utility program, do the following:
1. Start the Setup Utility program. See "Starting the Setup Utility program" on page 25.
2. On the Security menu, select TCG Feature Setup and press Enter.
3. Select TCG Security Features. Then, set TPM Support to Active.
4. Press F10 to save settings and exit the Setup Utility program. The server will restart to enable the
TPM function.

Exiting the Setup Utility program

After you finish viewing or changing settings, press Esc to return to the Setup Utility program main interface.
If you are on a nested submenu, press Esc repeatedly until you reach the main interface. Then, do one
of the following to exit the Setup Utility program:
• Press F10 to save the new settings and exit the Setup Utility program.
• Press F9 to return to the default settings.
For more information about the Exit menu in the Setup Utility program, see "Exit menu" on page 28.

Updating or recovering the BIOS

This topic provides instructions on how to update the BIOS and how to recover from a POST and BIOS
update failure.
Lenovo might make changes and enhancements to the BIOS. When updates are released, they are available
for download on the Lenovo Web site at http://www.lenovo.com/drivers.
You also can use the Firmware Updater program to help you keep the server firmware up-to-date. See
"ThinkServer EasyUpdate Firmware Updater" on page 10.
Updating (flashing) the BIOS
This topic provides instructions on how to update (flash) the BIOS.
30
ThinkServer TS150 User Guide and Hardware Maintenance Manual