Displaying Sensor Status - Furuno FA-150 Operator's Manual

3. MAINTENANCE, TROUBLESHOOTING
3.8

Displaying Sensor Status

The SENSOR STATUS screen shows sensor status.
1. Press the MENU key.
2. Select SENSOR STATUS then press the ENT key.
Sensor status message
3. Press the DISP key to close the display.
Sensor Status Message
CH MANAGEMENT
EXT DGNSS
EXT GNSS
EXT SOG/COG
HDG VALID
INT DGNSS BEACON
INT DGNSS MSG 17
INT GNSS
INT SOG/COG
OTHER ROT
ROT VALID
UTC CLOCK LOST
3-12
Sensor status messages and their meanings
Channel changed (displayed about 30 s)
Using external DGNSS
Using external GNSS
Using external SOG/COG
Heading data normal
Using internal DGNSS beacon
MSG 17 corrects internal GNSS with differential
correction
Using internal GNSS
Using internal SOG/COG
Value calculated from HDT, or ROT device used and
talker is other than T1
ROT data normal
Internal position fix lost
[SENSOR STATUS]
UTC CLOCK LOST
QUIT[MENU]
Meaning