If you long-touch (more than two seconds) the home switch when the home page or another
page is displayed, you'll move to the utility page. The utility page contains the following func-
• LCD Brightness
Adjusts the brightness of the display backlight. Higher numbers increase the brightness.
• LCD Contrast
Adjusts the contrast of the display. Higher numbers increase the contrast.
• LED Brightness
Adjusts the brightness of the switches. Higher numbers increase the brightness.
Moves to the settings page.
After synchronizing with MTX-MRX Editor, it will be necessary to enter the PIN code.
• IP Setting
Selects either PC or UNIT ID as the method of specifying the MCP1's IP address.
In the case of PC, use MTX-MRX Editor to specify the IP address.
In the case of UNIT ID, the IP address will be 192.168.0.UNIT ID.
After selecting PC or UNIT ID, touch the return switch to move to the confirmation
screen and automatically restart.
• Unit ID
Specifies the MCP1's UNIT ID. The range of this setting is 01 through FE.
If IP Setting is UNIT ID, make settings so that there is no conflict with the IP address of
After specifying UNIT ID, touch the return switch to move to the confirmation screen and
Initializes the MCP1.
Display the firmware version of MCP1.
Display the alert number which has occurred current.
10 MCP1 Installation Manual