Yamaha MCP1 Installation Manual page 16

Alert list
Number
Synchronization has not been
completed. It may be that syn-
070
chronization was halted before
completion.
The UNIT ID settings when
synchronization was per-
071
formed do not match the cur-
rent UNIT ID settings.
For other alerts, refer to "Alert list" in the "MTX-MRX Editor User Guide."
16 MCP1 Installation Manual
Content Action
Perform synchronization again
using MTX-MRX Editor. If this
does not solve the problem, ini-
tialize the MCP1.
Do not change any UNIT ID's
after performing synchroniza-
tion. If you've changed any
UNIT ID's, perform synchroniza-
tion again.
Single /
Type
Continuing
Error Continuing
Error Continuing