Flashforge Hunter Quick Start Manual page 13

How to Change the Vat Film
9
Flat Washer
Spring Washer
1. Place resin vat flat on workbench, unscrew all bolts with hexagon
wrench.
3. Detach the resin vat bottom plate and the middle plate.
Please don't lose two washers
while remove the bolt.
Resin Vat
Bottom Plate
Middle Plate
2. Turn the resin vat over, unscrew four bolts from the bottom of the
resin vat plate.
4. Remove the transparent glass, used vat film, silicone washer. Keep
the glass and silicone washer, discard the used vat film.
Transparent Glass
Used Vat Film
Silicone Washer