Table of Contents
Advertisement
Please read the following safety notices before installing or using this IP PBX. They are crucial for
safe and reliable operation of the device. Failure to follow the instructions contained in this
document may result in damage to your PBX and void the manufacturer's warranty.
1.
Please use the external power supply which is included in the package. Other power
supplies may cause damage to the device, affect performance or induce noise.
2.
Before using the external power supply in the package, please check your building power
voltage. Connecting to Inaccurate power voltage may cause fire and damage.
3.
Please do not damage the power cord. If the power cord or plug is impaired, do not use it.
Connecting a damaged power cord may cause fire or electric shock.
4.
Ensure the plug-socket combination is accessible even after the PBX is installed. In order to
service the PBX it will need to be disconnected from the power source.
5.
Do not drop, knock or shake the device. Rough handling can break internal circuit boards.
6.
Do not install the device in places where there is direct sunlight. Also do not place the
device on carpets or cushions. Doing so may cause the device to malfunction or cause a fire.
7.
Avoid exposing the device to high temperature (above 40°C), low temperature (below -10°C)
or high humidity. Doing so could cause damage and will void the manufacturer warranty.
8.
Avoid letting the device come in contact with water or any liquid which would damage the
device.
9.
Do not attempt to open the device. Non-expert handling of the device could cause damage
and will immediately void the manufacturer warranty.
10. Consult your authorized dealer for assistance with any issues or questions you may have.
11. Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
12. Wipe the device with a soft cloth that has been slightly dampened in a mild soap and water
solution.
13. If you suspect your device has been struck by lightning, do not touch the device, power plug
or phone line. Call your authorized dealer for assistance to avoid the possibility of electric
shock.
14. Ensure the PBX is installed in a well-ventilated room to avoid overheating and damaging the
device.
15.
Before you work on any equipment, be aware of any hazards involved with electrical
circuitry and be familiar with standard practices for preventing accidents if you are in a situation
that could cause bodily injury.
Safety Notice
5 / 130
DVX IPPBX
Hide quick links:
Advertisement
Table of Contents
