Table of Contents
Advertisement
DVX IPPBX
characters.
Notice:
1. DVX Series IPPBX Web GUI supports the following 11 languages:
English, Chinese, Arabic, Persian, Portuguese, Italian, French, Spanish, Russian, Turkish andThai.
You can select your native language or if this is not available then the most familiar one to login. We are
continuously adding more languages to meet the needs of our customers from all around the world.
2. Extension number can be used to login to the DVX IPPBX Web GUI, for more details please check the
DVX user
manual (Ext.User).
3. Operator user can login to the DVX IPPBX Web GUI to monitor the system status and check call logs and faxes.
Login username is operator and password is password.
2.1.2 Configure Network Profiles
Network Settings-->Network->IPv4
Settings.
Navigate to Web Menu
DVX IPPBX WAN interface can be configured to operate in Static, DHCP or PPPoE mode. In the
majority of deployment scenario's it is standard practice to configure the unit in Static mode.
DHCP and PPPoE will be described later in
chapter
5.
To configure your DVX system in Static mode, you must assign an available static IP address along
with corresponding subnet mask, gateway and DNS to the WAN interface of the DVX IPPBX. For
example, you could assign an IP address of 192.168.1.189, Subnet Mask: 255.255.255.0, Gateway:
192.168.1.253, DNS: 8.8.8.8.
After modifications are complete, please click the "Save" button to save the configuration. You
will now be presented with a dialog box asking you to reboot the system to make the changes
effective. Please reboot the system and once complete you can connectthe IPPBX to your local
16 / 130
Hide quick links:
Advertisement
Table of Contents
