D-Link DVX-2002F User Manual page 26

SIP: Tick the checkbox to activate SIP protocol.

IAX2: Tick the checkbox to activate IAX2 protocol.

Name: Alias of this extension which can be the name of the extension user.

Extension: Number of this user extension.

Password: The password used for the phones to register.This can be set manually or can be

generated by the IPPBX system. Auto generated password consists of numbers, letters and
special characters. If this is an analog extension then password is of no use as analog phones
are not required to register.
Outbound CID: Choose a number to show to the external called party. This feature only

works with SIP trunks if the ITSP(Internet Telephony Service Provider) allows this number to
be passed.
DialPlan: Defines which type of numbers the extension can dial.

Analog Phone: The FXS port number. An analog phone attached to this port will use this

extension number.
Voicemail
Enable: Activate voicemail service for this extension.

Password: Password for extension user to access the voicemail facilities.

Delete VMail: Delete voice messages if the system has sent the message to user via email.

Email: Email address of this extension user.

Other Options
Web Manager:If enabled, users can use their extension number and voicemail password to

login to the IPPBX system web GUI.
Agent: If enabled, this user extension can be a call queue agent.

Call Waiting: With this option enabled, busy extensions will hear the call-waitingtone, and

can use hook-flash to switch between callers. This option is only for analog extensions, for IP
extensions you have to configure this feature directlyon the IP phones.
Allow Been Spied: Enable this option to allow other extension users the ability to spy on the

phone calls of this extension by using feature codes.
Pickup Group: Define a pickup group for this extension, extensions in the same pickup group

can help pickup an incoming call on other ringing extensions in the same pickup group using
feature code *8. Available values are from 0 to 63.
Mobility Extension: An external number can be specified here e.g. your mobile phone

number. If you now call the IPPBX using the mobile phone specified, you will hear a dial tone
and will havefull access to the IPPBX system functionalities just as a standard extension user
does.
Mobility Extension

your external phone number here.
VoIP Settings
NAT: Check this option if extension user or the phone is located behind a router.

Number: When"Mobility Extension"as described above is enabled, enter
25 / 130
DVX IPPBX