Connect To A Wireless Network - D-Link i2eye DVC-1100 Quick Installation Manual

The Setup Wizard (continued) The Setup Wizard (continued)
The Setup Wizard (continued) The Setup Wizard (continued) The Setup Wizard (continued)

Connect to a Wireless Network

Connect to a Wireless Network Connect to a Wireless Network
Connect to a Wireless Network Connect to a Wireless Network
(Only if using DVC-1100 in wireless mode. Wireless mode is enabled by default.)
Highlight the SSID of the de-
vice you wish to connect to
and press Enter on the re-
mote control.
Note: The number next to
the SSID indicates the sig-
nal strength of the available
access point on the wireless
network.
Confi Confi gur gur e Y e Y our Wir our Wir
Confi Confi gur Confi gur gur e Y e Y e Y our Wir our Wir our Wir eless Settin
Note: The wireless settings must match your existing wireless network
settings.
Press Enter to choose the
Authentication Type be-
tween Open System and
Shared Key.
Press Enter to choose the
appropriate WEP Type be-
tween 64, 128 or 256 bits.
Press Enter to select the
Key ID you wish to use.
Note: If you have any questions regarding using wireless encryption
on the DVC-1100, please refer to DVC-1100 manual on page 13.
All manuals and user guides at all-guides.com
eless Settin eless Settin gs gs gs gs gs eless Settin
eless Settin
Click
7
Enter the your encryption
OK
keys here.