Show Route Protocol - Juniper EX3400 Features Manual

DHCP and Other System Services Feature Guide for EX2300, EX3400, and EX4300 Switches

show route protocol

List of Syntax
Syntax
Syntax (EX Series
Switches)
Release Information
Description
Options
432
Syntax on page 432
Syntax (EX Series Switches) on page 432
show route protocol protocol
<brief | detail | extensive | terse>
<logical-system (all | logical-system-name)>
show route protocol protocol
<brief | detail | extensive | terse>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
and options introduced in Junos OS Release 9.2.
ospf2 ospf3
ospf2 and ospf3 options introduced in Junos OS Release 9.2 for EX Series switches.
option introduced in Junos OS Release 10.0.
flow
option introduced in Junos OS Release 10.0 for EX Series switches.
flow
Display the route entries in the routing table that were learned from a particular protocol.
brief | detail | extensive | terse—(Optional) Display the specified level of output. If you
do not specify a level of output, the system defaults to
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
protocol—Protocol from which the route was learned:
—Access route for use by DHCP application
access
access-internal —Access-internal route for use by DHCP application
—Locally generated aggregate route
aggregate
arp —Route learned through the Address Resolution Protocol
—Asynchronous Transfer Mode virtual private network
atmvpn
bgp —Border Gateway Protocol
—Circuit cross-connect
ccc
—Directly connected route
direct
—Distance Vector Multicast Routing Protocol
dvmrp
—End System-to-Intermediate System
esis
—Locally defined flow-specification route
flow
—Precomputed protection route or backup route used when a link goes down
frr
isis —Intermediate System-to-Intermediate System
.
brief
Copyright © 2017, Juniper Networks, Inc.