3A. Fasten the Swing Tube (E) to hole on the underside of Front Support Tube (D)
using:
1 - (6) Hex Bolt M10x1.5x80L
2 - (51) Flat Washer D20xD11x2T
1 - (75) Nylon Nut M10x1.5x10T
3B. Align the Swing Tube (E) to the adjustment holes on the front of Front Support
Tube (D) and lock the two parts in place Using:
1 - (100) Pin D9.4x70
Thoroughly tighten the hardware once complete
STEP 3
Appearance upon completion of step 3.
14