1A. Slide Rear Support Tube (B) through the bracket of the Backrest Support Tube
(A). Fasten the Rear Support Tube (B) to the Backrest Support Tube (A) using:
1 - (6) Hex Bolt M10x1.5x80L
2 - (51) Flat Washer D20xD11x2T
1 - (75) Nylon Nut M10x1.5x10T
1B. Align the adjustment holes on the Backrest Support Tube (A) with Rear Support
Tube (B) and lock the two parts into place using:
1 - (100) Pin D9.4x70
Thoroughly tighten the hardware once complete
Appearance upon completion of step 1.
STEP 1
10