Front Panel Controls - T+A HV SERIES User Manual

All the important functions of the PDT 3100 HV can be controlled using the buttons and rotary knobs on the front
panel. The large rotary knobs are used for navigation in and menu operation.
Functions which are rarely needed are controlled with the help of a menu which can be called up by a brief press on
the left rotary knob.
All information relating to the machine's state, the current track and the associated transmitting station are
displayed on the integral screen. The following section explains the functions of the buttons on the machine, and the
information provided on the screen.
On / Off switch


32

Front panel controls

Touching the  button briefly switches the device on and off.
 
The button remains dimly lit even in stand-by mode, to indicate that the
PDT 3100 HV is ready for use.

Caution!
The mains button is not an isolation switch. Certain parts of the machine
remain connected to mains voltage even when the screen is switched off and
dark. The device can be disconnected from the mains only by withdrawing the
mains plug from the wall socket. If you know you will not be using the machine
for a long period, we recommend that you disconnect it from the mains.