Brake Fluid - MZ 125 SX Repair Manual

!.J':;f
1
Rear Brake
4.3.1 Brake Fluid
Attention!
If insufficient brake fluid is present, air can enter the
braking system, reducing the braking performance.
Always check the fluid level when ventilating the
brakes. Add brake fluid - DOT 4 recommended· if
necessary.
Always use the same type of brake fluid. Never mix
different types of brake fluid!
Do not use dirty or old brake fluid.
Change the brake fluid every two years.
The storage tank is located on the right underneath the seat on
the intake muffler.
Inspection
Position the vehicle such that the storage tank sits horizontally.
The brake fluid level must be between the
MAX
and
MIN
markings, never lower!
Adding fluid
Attention!
Brake fluid is aggressive and poisonous!
Avoid contact with skin.
Do not pour onto paint, plastic or rubber surfaces.
Immediately wipe up spilled brake fluid.
Always cover sensitive components with a rag while
working on the brake system.
Only use new DOT4 brake fluid.
Do not mix different kinds.
Brake fluid absorbs water from the air.
For this reason, only store brake fluid in closed
containers.
1. Position the vehicle such that the storage tank sits horizon-
tally.
2. Screw off the cap of the storage tank.
3. Remove the hermetic bellows.
Inspect the hermetic bellows, replace if damaged.
4. Fill the storage tank up to the MAX mark with brake fluid.
5. Position the hermetic bellows, screw on the cap.
MZ 125 SXlSM Repair Manual
05/02
89