Brake Pads - MZ 125 SX Repair Manual

4.1.8
Brake Pads
Brakes Front
Inspection
Attention!
Reduced braking performance!
The thickness of the brake pads must never be less
than (B)= 2.0 mm.
If the thickness is insufficient, the brake discs may be
damaged.
@
The
brake pads (1) have wear marks (2).
Ifthese wear marks are no longer visible, the brake pads must be
replaced.
Always replace the brake pads in pairs.
Removal
1. Unscrew the mounting pins (1).
2. Remove both brake pads (2).
3. Pull out the tension bracket (3) .
Installation
Note:
The brake pad lining seats can be treated with copper paste or
brake protector. This prevents the brake pads from squeaking.
The tension bracket must be positioned under the mount pins.
1. Insert the tension bracket (3).
The wide sliding side must face toward the pistons.
2. Insert new brake pads (2).
3. Slide in the mounting pins (1) and screw them tight.
nfiln?
79