Chain Plate And Dog - MZ 125 SX Repair Manual

LJ.J..
r
1
Rear Wheel
4.4.2 Chain Plate and Dog
The chain plate is screwed with the dog.
(1) Inner reducing bush
(2) Dog rubber piece
(3) Dog
(4) Chain plate
Removal
1. Remove the rear wheel (see 4.4 "Rear Wheel").
2. Unscrew the five hexagon head screws.
3. Remove the chain plate
4. Remove and inspect the dog and dog rubber piece.
The rubber piece must not be porous, damaged or cracked.
Replace a defective rubber piece.
5. Remove the screws and self-tightening nuts.
Installation
1. Install a new chain plate with new nuts to the dog.
2. Insert the dog rubber piece into the wheel.
Spray the dog with silicon spray to ease the installation.
3. Insert the dog with the chain plate.
4.
I\.~ount
the whee!
(see 4.4.1 "Replacing the Rear Wheel").
104
Tightening torque:
Chain plate mount:
05/02
30+
5
Nm
MZ 125 SXlSM
Repair
Manual