Replacing The Front Wheel - MZ 125 SX Repair Manual

u j f
1
Front Wheel
4.2.1 Replacing the Front Wheel
Removal
00' 1
Attention!
The vehicle may fall over.
Properly secure the vehicle on the installation stand
before beginning work.
When using tension belts, be careful not to damage
the paint.
The front wheel must be free of load.
1. Screw off the axle nut.
2. Loosen both locking screws.
3. Open the left locking screw.
4. Pull out the axle to the right side, holding the wheel in its
installed position.
5. Remove the speedometer drive.
6. Remove the brake disc from the brake caliper.
7. Remove the wheel.
MZ 125 SX!SM Repair Manual
05/02
83