MZ 125 SX Repair Manual page 72

Telescopic Fork
3. Place the fitting washer (10) on the lower fork bridge (15),
slide the telescopic fork with steering pipe (14) into the pre-
installed steering bearing from below.
4. Lay the filling washer (13) onto the top bearing.
5. Position the cover (9).
6. Mount the top fork bridge (12), position the washer (8) and
tighten with the M24x1 nut (11).
7. Mount the handlebar.
8. Connect the cable to the cable harness and lay properly.
9. Connect the three bowden cables.
Make certain they do not kink.
10. Install the front wheel.
11. Install the fuel tank and seat.
12. Perform a function test on the front brake.
rl~-----j®
~
13
14
Tightening torque:
Top locking screws:
Bottom locking screws:
25+
5
Nm
25+ 5 Nm
68
05/02
MZ 125 SXlSM Repair Manual