Change The Battery - Intermec CN51 User Manual

Change the Battery

Document Title
Use these Intermec accessories to charge the CN51 batteries:
• Quad Battery Charger (Model AC21)
Charge-Only Multidock (Model AD23)
•
• Ethernet Multidock (Model AD24)
• Single Dock (Model AD27)
• Vehicle Power Adapter (Model AE36)
AC Power Adapter (Model AE37)
•
When the battery in the CN51 has a low charge, replace it with a
charged battery.
Note: When you remove a battery from the computer, Intermec
recommends that you install a charged battery within five minutes to
maintain your network connections.
1 Save your files and close all open applications.
2 Press the Power button, and then select Hibernatefrom the menu.
3 If necessary, disconnect the handstrap from the top of the
computer.
4 Push forward on the battery release tab until the battery releases,
and then lift the battery away from the computer.
Chapter 1 — About the Computer Features
DRAFT
5