Accessories And Replacement Parts - Vega VEGAMIP R61 Operating Instructions Manual

3 Product description
Storage
Storage and transport
temperature
Protective cover
Flanges
Electronics module
10
Up to the time of installation, the packages must be left closed and
stored according to the orientation and storage markings on the
outside.
Unless otherwise indicated, the packages must be stored only under
the following conditions:
Not in the open
l
Dry and dust free
l
Not exposed to corrosive media
l
Protected against solar radiation
l
Avoiding mechanical shock and vibration
l
Storage and transport temperature see chapter "Supplement -
l
Technical data - Ambient conditions"
Relative humidity 20 ... 85 %
l

3.4 Accessories and replacement parts

The protective cover protects the sensor housing against soiling and
intense heat from solar radiation.
You will find additional information in the supplementary instructions
manual "Protective cover" (Document-ID 34296).
Flanges are available in different versions according to the following
standards: DIN 2501, EN 1092-1, ANSI B 16.5, JIS B 2210-1984,
GOST 12821-80.
You will find additional information in the supplementary instructions
manual "Flanges according to DIN-EN-ASME-JIS" (Document-ID
31088).
The electronics module VEGAMIP R61 is a replacement part for
microwave barriers of VEGAMIP series 60.
You will find additional information in the following operating
instructions manual:
"Electronics module VEGAMIP R61 (receiving unit)" (Document-ID
l
36428)
VEGAMIP R61 • - Relay