Blackmagic Video Assist Setup; Video Settings; About Settings; Changing The Language - Blackmagicdesign Blackmagic Video Assist Installation And Operation Manual

Blackmagic Video Assist Setup

Blackmagic Video Assist Setup contains two configuration tabs labeled 'video' and 'about'.
These tabs let you import 3D LUTs into your video assist, change the name of the unit, and set
the language of your video assist's user interface.

Video Settings

3D LUTs can be imported into your video assist so you can display the video with color
corrected looks applied. 3D LUTs can be generated as .cube files in DaVinci Resolve and you
can find more information in the DaVinci Resolve manual.
Refer to the 'storage, monitor, display, audio and setup settings' section in this manual for
information on 3D LUTs and how to import them using Blackmagic Video Assist Setup.
The video settings let you import 3D LUTs into your video assist

About Settings

Use this tab to view information about your video assist such as the currently installed internal
software, and the name of the unit.
To change the name, click inside the 'name' edit box and type in a new name using your
computer keyboard.

Changing the Language

To change the language of your video assist's user interface, click on the current language drop
down menu and select a new language you would like to use.
To confirm your selection, click 'load'. Your chosen language will now be displayed on your
video assist.
Blackmagic Video Assist Setup 33