Plugging In Video; Plugging In Audio - Blackmagicdesign Blackmagic Video Assist Installation And Operation Manual

A kickstand is provided so you can mount the
unit on your desk. Simply lift the edge of the
stand and gently swing it into the open position.

Plugging in Video

The next step is to plug your SDI or HDMI source video into the Mini BNC, BNC or HDMI input.
The unit will auto detect the SDI or HDMI input depending on what you connect first. Mini BNC
to regular BNC cables can be purchased from your nearest professional video equipment
stores. Mini BNC connectors are also commonly known as DIN 1.0/2.3 connectors.
Connect your source video to the SDI or HDMI input on the left side. Connect an HDMI TV or SDI monitor by
plugging into the HDMI or SDI output. You can listen to the audio on your clips during recording and playback
by plugging a headset into the headset jack. On Blackmagic Video Assist 4K you can also listen to your audio
during playback via the built in speaker below the LCD.

Plugging in Audio

When plugging in your video, audio is also connected as it's embedded in the SDI or HDMI
video signal. However, Blackmagic Video Assist 4K also has built in mini XLR connectors so you
can plug in external balanced analog audio as well.
Your video assist uses common
LP-E6 type batteries.
Getting Started 6