Plugging In Your Computer; Installing Blackmagic Smartview Setup - Blackmagicdesign SmartView 4K Installation And Operation Manual

Plugging in your Computer

Configure SmartView or SmartScope monitor settings by connecting to your computer via USB
and installing Blackmagic SmartView setup.
The USB connection can also be used for applying internal software updates downloaded from
the Blackmagic Design website. Software updates can provide new features, compatibility with
new hardware and support for new formats. Blackmagic SmartView setup software runs on both
Mac OS X and Windows computers.

Installing Blackmagic SmartView Setup

Blackmagic SmartView setup runs on the latest Mavericks and Yosemite versions of Mac OS X,
and both 32 and 64-bit versions of Windows 7 and 8 with the latest service packs installed.
Blackmagic SmartView setup can be installed on multiple networked computers if desired.
The DVD supplied with SmartView contains the software installer, but we recommend visiting
www.blackmagicdesign.com/support to ensure you have the latest version.
To install on Mac OS X:
Open the supplied DVD, or downloaded disk image, and double click on the install SmartView
icon. A SmartView folder will be created in your applications folder, containing SmartView setup,
an uninstaller for removing previous versions when updating, and a documents folder
containing this manual plus other SmartView information.
To install on Windows:
On Windows, open the supplied DVD, or downloaded zip file, and double-click on the
SmartView installer. Follow the onscreen prompts to install the software.
To install on Mac OS X, launch the
SmartView.dmg file on the suplied DVD,
or from your downloads folder, then double
click on the install SmartView icon
Getting Started 6