Precise Instrument DAT 400 Technical Manual page 48

PRINT PROTOCOL
This protocol enables the communication with a printer. The data on the printed report are the following:
NET, GROSS and TARE (+ PEAK, if enabled).
The print command takes place by pressing the
The printed report is issued only if the following conditions are met:
• Gross weight positive
• Net weight positive
• Stable weight (**)
• BLIND function disabled (***)
(*) In case the
input #2 only.
(**) The weight stability condition is controlled only if the "MOTION" parameter (see page 28) is set
to a value different than 0.
If MOTION = 0 the printed report is issued even if the weight is unstable.
(***) In case the BLIND function is enabled (see page 18) the print command can take place through
the remote input #2 only, not via the
Between one printout and the next one the weight must change for at least 20 counts.
CONNECTION TO THE PRINTER
PRINTED REPORT FORMATS
Standard
Net 9.488 kg
Gross 19.874 kg
Tare 10.386 kg
Page 46
PRG
key is locked (see page 18) the print command can take place through the remote
PRG
key or by activating the remote input #2. (*)
PRG
key.
Peack enabled
Net 9.488 kg
Gross 19.874 kg
Tare 10.386 kg
Peak 35.294 kg