Installing The Aura Ssd For Mac Pro - OWC AURA Installation Manual

2.2 Installing the Aura SSD For Mac Pro

1. Attach the included power cable to the Aura SSD, as shown below. The white connector
on the end of the cable snaps into the white connector on the end of the SSD.
1a
2. Install the SSD into the Mac Pro, as shown below. Insert the SSD at a shallow angle,
making sure that the power cable is out of the way.
3. Verify that the SSD is fully seated in the connector on the Mac Pro and that the screw
hole in the SSD lines up with the screw hole in the Mac Pro. Then, use the included driver
and drive mount screw to secure the SSD.
OWC Aura SSD for Mac Pro
1b
3
Installation