Page 1
A U R A S S D F O R M A C P R O Installation Guide...
Page 2
1.1 System Requirements 1.2 Package Contents 1.3 About This Manual Installation ................2 2.1 Preparing the Mac Pro 2.2 Installing the Aura SSD For Mac Pro Support Resources ............... 5 3.1 Troubleshooting 3.2 About Data Backup 3.3 Online Resources 3.4 Contacting Technical Support...
The images and descriptions may vary slightly between this manual and the unit shipped. Functions and features may change depending on the firmware version. The latest product details and warranty information can be found on the product web page. OWC’s Limited Warranty is not transferable and subject to limitations.
Page 4
SSD aside. Notes: the screw that was removed in this step will not be used to mount the Aura SSD; store original screw in a safe place. The Apple SSD can also be installed into an OWC Envoy Pro enclosure.
Page 5
2.2 Installing the Aura SSD For Mac Pro 1. Attach the included power cable to the Aura SSD, as shown below. The white connector on the end of the cable snaps into the white connector on the end of the SSD.
Page 6
Mac Pro (circled below). NOTE: The screws included with this kit are intended only for use with the Aura SSD. If you uninstall the Aura, you must use the original Apple screws to reinstall Apple’s SSD; please store them in a safe place.
3.1 Troubleshooting If the OWC Aura SSD for Mac Pro is not available as a location to install OS X, make sure that it has been formatted properly. If the SSD is not shown in the Disk Utility, shut down the Mac Pro, unplug it from power and from all peripherals, and work backwards through the steps in Section 2.2 to make sure that all components are properly installed.
Page 8
OWC reserves the right to make changes or revisions in the product design or the product manual without reservation and without obligation to notify any person of such revisions and changes.
Need help?
Do you have a question about the AURA and is the answer not in the manual?
Questions and answers