Cooling Fan - AEG BPE642020M User Manual

20 www.aeg.com
Description
4
KEY TONE
5 FAULTY TONE
6 DEMO MODE
7 SERVICE MENU
8 RESTORE SETTINGS
1) It is not possible to deactivate the tone of the ON / OFF sensor field.
1. When the appliance is activated,
touch
hold for three seconds.
The display shows SET1 and "1" flashes.
2. Touch
3. Touch
4. Touch
of the setting.
5. Touch
To exit the Settings menu, touch
touch and hold
10.5 Automatic Switch-off
For safety reasons the appliance
deactivates automatically after some
time if an oven function operates and
you do not change any settings.
Temperature (°C)
30 - 115
120 - 195
200 - 245
250 - maximum
After the Automatic switch-off, touch a
sensor field to operate the appliance
again.
The Automatic switch-off
does not work with the
functions: core temperature
sensor, Light, Slow Cooking,
Duration, End, Time delay.
1)
then touch it again and
or to set the setting.
.
or to change the value
.
.
Switch-off time (h)
12.5
8.5
5.5
1.5
Value to set
CLICK / BEEP / OFF
ON / OFF
Activation code: 2468
-
YES / NO
10.6 Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the appliance
is deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness:
– when the appliance is activated.
– if you touch a sensor field during
the night brightness (apart from
or
ON / OFF), the display goes back
to the day brightness mode for
the next 10 seconds.
– if the appliance is deactivated and
you set the Minute Minder. When
the Minute Minder function ends,
the display goes back to the night
brightness.

10.7 Cooling fan

When the appliance operates, the
cooling fan activates automatically to
keep the surfaces of the appliance cool.
If you deactivate the appliance, the
cooling fan can continue to operate until
the appliance cools down.