AEG BPE642020M User Manual page 13

Clock function
SET+GO
MINUTE MINDER
00:00 COUNT UP TIMER
7.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
"12" flashes.
1. Touch or
2. Touch or
3. Touch or
4. Touch or
The display shows the new time.
To change the time of day touch
again and again until
7.3 Setting the DURATION
1. Set an oven function and
temperature.
2. Touch again and again until
starts to flash.
3. Use or to set the minutes for
DURATION time.
4. Touch or the DURATION time
starts automatically after 5 seconds.
5. Use or to set the hours for
DURATION time.
6. Touch
. The DURATION time
starts automatically after 5 seconds.
When the set time ends, an acoustic
signal sounds for 2 minutes.
setting flash in the display. The appliance
deactivates.
Application
To start the appliance with necessary settings with only
one touch of the sensor field any time later.
To set a countdown time. This function has no effect on
the operation of the oven. You can set the MINUTE
MINDER at any time and also when the appliance is off.
To set the count up, which shows how long the appli-
ance operates. This function has no effect on the opera-
tion of the appliance. It is on immediately when the oven
starts to heat. The COUNT UP TIMER is not activated if
DURATION and END are set.
and 12:00.
to set the hours.
.
to set the minutes.
.
starts to flash.
and time
7. Touch a sensor field or open the
oven door to stop the acoustic
signal.
8. Turn off the appliance.
7.4 Setting the END
1. Set an oven function and
temperature.
2. Touch again and again until
starts to flash.
3. Use or to set the END and
or to confirm. First you set the
minutes and then the hours.
When the set time ends, an acoustic
signal sounds for 2 minutes.
time setting flash in the display. The
appliance deactivates automatically.
4. Touch a sensor field or open the
oven door to stop the acoustic
signal.
5. Turn off the appliance.
7.5 Setting the TIME DELAY
function
1. Set an oven function and
temperature.
2. Touch again and again until
starts to flash.
3. Use or to set the minutes for
DURATION.
4. Touch .
5. Use
or to set the hours for
DURATION.
ENGLISH 13
and the