Clock Functions - AEG BPE642020M User Manual

12 www.aeg.com
The lamp may automatically
deactivate at a temperature
below 60 °C during some
oven functions.
6.3 Setting the oven function
1. Activate the appliance with
The display shows the set temperature,
the symbol and the number of the oven
function.
2. Touch
function.
3. Touch
automatically after five seconds.
If you activate the appliance
and do not set an oven
function or programme, the
appliance deactivates
automatically after 20
seconds.
6.4 Changing the temperature
Touch or
temperature in steps of 5 °C.
When the appliance is at the set
temperature, an acoustic signal sounds
three times and the Heat up indicator
goes out.
6.5 Checking the temperature
You can see the temperature in the
appliance when the function or
programme operates.

7. CLOCK FUNCTIONS

7.1 Clock functions table
Clock function
or to set an oven
or the appliance starts
to change the
TIME OF DAY
DURATION
END
TIME DELAY
1. Touch
The Temperature / Time display shows
the temperature in the appliance.
2. Touch
temperature or the display shows it
automatically after five seconds.
6.6 Fast heat up function
or .
The Fast heat up function is not available
with every oven function. An acoustic
signal sounds if the Fast heat up function
is not available for the set function if
Faulty tone is activated in the settings
menu. Refer to "Using the settings
menu".
The Fast heat up function decreases the
heat up time.
To activate the Fast heat up function
touch and hold
seconds.
If you activate the Fast heat up function,
the bars on the display
one and
the function operates.
Application
To show or change the time of day. You can change the
time of day only when the appliance is on.
To set how long the appliance operates.
To set when the appliance deactivates.
To combine DURATION and END function.
.
to go back to the set
Do not put food in the oven
when the Fast heat up
function operates.
for more than three
flash one by
comes on to show that