Emerson OPM4001 Installation And Operation Manual page 23

I N S T R U C T I O N M A N U A L R E V 4 . 2
All raised buttons can be touched and values changed.
Instructions are on the bottom of the screen when
required.
All flat buttons are read only.
Cal time is in 24hr clock format.
Note: If in internal the clock will control the cycle.
While in external the internal clock is disabled and only
an external input will activate the cycle.
Clone backup/restore
If not already there, Enter SD Password: 123
Backup: After startup is complete and all controller
changes are made, enter a new file name with 8
characters and/or numbers only, no more, no less.
Touch "Backup PLC -> SD" System backup all
changes to the S.D. card.
Restore: to restore put the name of your backup
and touch "Restore SD -> PLC. This will take several
minutes to complete the backup.
22