Change Passwords - Emerson OPM4001 Installation And Operation Manual

I N S T R U C T I O N M A N U A L R E V 4 . 2

CHANGE PASSWORDS

Only the tech can change passwords the default for
Operator is (1111) and for Tech (1234). To change
passwords touch raised button and enter new password
(up to 8 numbers are provided).
The tech can reset to default value by holding the reset
button for 3 seconds.
CRITICALLY IMPORTANT!
THE TECH (GATEKEEPER) OF THE CONTROL UNIT AT HIS
DISCRETION CAN CHANGE BOTH PASSWORDS;
HOWEVER IT IS CRITICAL THAT THE PASSWORD IS
SECURED AGAINST LOSS. IF GATEKEEPER'S PASSWORD
IS LOST CONTACT THE FACTORY FOR PROCEDURE TO
RESET TO DEFAULT SETTINGS.THIS PROCEEDURE IS IN
PLACE TO PROTECT THE INTEGRITY OF THE DATA
COLLECTED AND THE OPERATION OF THE UNIT.
26