Table of Contents
Advertisement
Configuration (Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
Automatic Programs
To run the EZpar T6 USB in automatic mode, follow the instructions below:
1.
Press <MENU> repeatedly until P-- shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select an automatic program, from P 1–4.
4.
Press <ENTER>.
Auto-Program Speed
To change the auto-program speed on the EZpar T6 USB, do the following:
1.
Press <MENU> repeatedly until P-- shows on the display.
2.
Use <UP> or <DOWN> to increase or decrease the program speed from S 1–100.
3.
Press <ENTER>. The product will return to the last selected mode.
Sound-Active Mode
To run the EZpar T6 USB in sound-active mode, follow the instructions below:
1.
Press <MENU> repeatedly until P-- shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select a sound-active program, from P5-6.
4.
Press <ENTER>.
5.
Turn the sensitivity knob up until the product responds to the beat of the music.
The product will only respond to low frequencies of music (bass and drums).
Preset Color Mode
To run the EZpar T6 USB on a static color, do the following:
1.
Press <MENU> repeatedly until C-- shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select a static color, from C 1–7.
4.
Press <ENTER>.
Custom Color Mixing
To custom mix a static color, follow the instructions below:
1.
Press <MENU> repeatedly until u-- shows on the display.
2.
Press <ENTER> and one of the following will show on the display:
•
r_ _ _ (red)
•
g_ _ _ (green)
•
b_ _ _ (blue)
3.
Press <ENTER> to cycle through the settings.
4.
When the desired setting shows on the display, use <UP> or <DOWN> to increase or decrease
the value, from 000–255 for red, green, or blue.
5.
Repeat steps 3 and 4 until the product outputs as desired.
Page 8 of 15
Operation
EZpar T6 USB User Manual Rev. 2
Advertisement
Table of Contents
