Configuration (D-Fi Usb) - Chauvet EZpar T6 USB User Manual

Operation
D-Fi USB Connectivity
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so
may cause damage to the product.
Once plugged in, the D-Fi USB will take over the product. Wired DMX, manual
display control/menu buttons and IRC-6 will be unavailable until you unplug the D-
Fi USB. The priority levels are:
1. D-Fi USB
2. Wired DMX
3. IRC-6 Remote Control
4. Manual Digital Display / Menu Buttons

Configuration (D-Fi USB)

1. Set the DMX Personality and DMX address on the EZpar T6 USB.
2. Plug in the D-Fi USB and use the Chart provided to set BOTH:
• the Channel, and then
• The Receiving or Transmitting option
NOTE: DIP Switch 5 is for Transmitting OR Receiving, please choose carefully.
D-Fi USB DIP Switch Channels
EZpar T6 USB User Manual Rev. 2
.
Page 11 of 15