Chapter 2 System Setup; Overview; Unpacking The System - Supero SUPERSERVER AS-4021GA-62R+F User Manual

2-1

Overview

This chapter provides a quick setup checklist to get your SuperServer AS-4021GA-
62R+F up and running. Following the steps in the order given should enable you
to have the system operational within a minimal amount of time. If your system is
not already fully integrated with a motherboard, processor, system memory etc.,
please turn to the chapter or section noted in each step for details on installing
specifi c components.
2-2

Unpacking the System

You should inspect the box the SuperServer AS-4021GA-62R+F was shipped in and
note if it was damaged in any way. If the server itself shows damage, you should
fi le a damage claim with the carrier who delivered it.
Decide on a suitable location for setting up and operating the SuperServer AS-
4021GA-62R+F. It should be situated in a clean, dust-free area that is well ventilated.
Avoid areas where heat, electrical noise and electromagnetic fi elds are generated.
You will also need it placed near a grounded power outlet.
!
•
Review the electrical and general safety precautions in Chapter 4.
•
Use a regulating uninterruptible power supply (UPS) to protect the server from
power surges, voltage spikes and to keep your system operating in case of a
power failure.
•
Allow the power supply units and Serial ATA drives to cool before touching
them.
•
To maintain proper cooling, always keep all chassis panels closed when not
being serviced.
Chapter 2
System Setup
Warnings and Precautions!
2-1
Chapter 2: Server Installation
!