Table of Contents
Advertisement
Legacy USB Support
Select "Enabled" to enable the support for USB Legacy devices. Disable Legacy
support if there are no USB devices installed in the system. "Auto" disables
Legacy support if no USB devices are connected. The options are Disabled,
Enabled and Auto.
IDE Confi guration
Onboard PCI IDE Controller
This setting allows you to Enable or Disable the PCI IDE controller.
On Chip SATA Channel
This setting allows you to Enable or Disable the OnChip SATA channel.
On Chip SATA Type
Use this setting to set the On Chip SATA type. Options include
Native IDE, RAID, AHCI and Legacy IDE.
SATA IDE Combined Mode
This setting allows you to Enable or Disable the SATA IDE combined mode.
PATA Channel Confi guration
This allows you to set PATA channel confi guration. Options include SATA as
Primary or SATA as secondary.
Primary/Secondary/Third/Fourth IDE Master/Slave
Type
This selects the type of device connected to the system. Options include
Auto, CD/DVD, Not Installed and ARMD
LBA/Large Mode
LBA (Logical Block Addressing) is a method of addressing data on a disk
drive. The options are Disabled and Auto.
7-9
Chapter 7: BIOS
Advertisement
Table of Contents
