Power Supply Connections - Supero SUPERSERVER AS-4021GA-62R+F User Manual

SUPERSERVER AS-4021GA-62R+F User's Manual
Figure 6-5: Power Supply Release Button

Power Supply Connections

Connect each of the following cables, as required, by your motherboard manufac-
turer. In some instances, some cables may not need to be connected. Some cables
may not be available with your model.
Name
20-pin or 24-pin power
cable
HDD (Hard Drive) power
cable
8-pin motherboard cable
4-pin motherboard cable
5-pin SMBus power cable
(small)
2-pin INT cable
Power Supply Cables
Qty Connects to:
20-pin or 24-pin power cable provides electricity to the
1 Motherboard motherboard. and has twenty to twenty-four yellow,
black, gray, red, orange, green and blue wires.
Each cable has three connectors (two Hard Drive
[HDD] and one Floppy Drive [FDD]). Attach the HDD
2 Backplane connectors to the backplane. If you are using a
Supermicro backplane, the FDD connector does
not need to be attached.
Provides power to the motherboard CPU. This cable
1 Motherboard
has two black and two yellow wires.
Provides power to PCI expansion card. This cable has
1 Motherboard
two black and two yellow wires.
Allows the SM (System Management) bus to monitor
1 Motherboard
power supply
Intrusion detection cable allows the system to log when
1 Motherboard
the server chassis has been opened.
6-6
Release
Button
Description