Chapter 2 System Setup; Overview; Unpacking The System - Supero SuperWorkstation 7036A-T User Manual

2-1

Overview

This chapter provides a quick setup checklist to get your SuperWorkstation 7036A-T
up and running. Following the steps in the order given should enable you to have
the system operational within a minimal amount of time. If your system is not al-
ready fully integrated with a motherboard, processor, system memory etc., please
turn to the chapter or section noted in each step for details on installing specifi c
components.
2-2

Unpacking the System

You should inspect the box the SuperWorkstation 7036A-T was shipped in and note
if it was damaged in any way. If the workstation itself shows damage, you should
fi le a damage claim with the carrier who delivered it.
Decide on a suitable location for setting up and operating the SuperWorkstation
7036A-T. It should be situated in a clean, dust-free area that is well ventilated. Avoid
areas where heat, electrical noise and electromagnetic fi elds are generated. You
will also need it placed near a grounded power outlet.
Once the SuperWorkstation 7036A-T is placed in the appropriate location, slide the
locking tabs on each caster down to keep it stationary.
!
•
Ensure that the caster wheels on the workstation are locked.
•
Review the electrical and general safety precautions in Chapter 4.
•
Use a regulating uninterruptible power supply (UPS) to protect the workstation
from power surges, voltage spikes and to keep your system operating in case
of a power failure.
•
Allow the power supply units and hot-swap SATA drives to cool before touch-
ing them.
Chapter 2
System Setup
Warnings and Precautions!
2-1
Chapter 2: System Setup
!