Supero SUPERSERVER AS-4021GA-62R+F User Manual page 98

SUPERSERVER AS-4021GA-62R+F User's Manual
Hyper Transport Confi guration
NODE0: PCI-X2 HT Link
Link Speed
The Hyper Transport link will run at this speed if it is slower than or equal
to the system clock speed. Options include 1 GHz and Auto.
Link Width
Hyper Transport runs at this width. Options include Auto, 4 Bit, 8 Bit
and 16 Bit.
NODE0: NODE1 HT Link Speed
Link Speed
The Hyper Transport link will run at this speed if it is slower than or
equal to the system clock speed and what the board is capable. Options
include 1 GHz and Auto.
NODE0: NODE1 HT Link Width
Link Width
Hyper Transport runs at this width. Options include Auto, 4 Bit, 8 Bit
and 16 Bit.
IOMMU
This setting is used to disable or set the GART size in systems without AGP.
Options include AGP Present, Disabled, 32 MB, 64 MB, 128 MB, 256 MB,
512 MB and 1 GB.
HD Audio Azalia Device
This setting allows you to enable or disable your HD Audio Azalia device. Options
include Enabled, Disabled and Auto.
Frontside Audio Mode
Use this setting to set the frontside audio mode. The default is HD Audio.
OHCI/EHCI HC Device Functions
These settings allow you to either Enable or Disable functions for OHCI or EHCI
bus devices.
USB 2.0 Controller
This setting allows you to Enable or Disable the USB 2.0 Controller.
7-8