Miele PW 6101 Programming Instructions Manual page 17

Material number
Turn the rotary dial to access the material
number input field. The material number
cannot be changed! When a new
programme is created in supervisor level
xxxxxxxxx will appear in this position.
ID number
The ID number number cannot be changed!
Create ~ Programme header
Material number: xxxxxxxxx
ID number: 123456789
- e
Area 1 - 2 - 3
Turn the rotoary dial clockwise to access the
input field for area 1.
Create ~ Programme header
Area 1: No
Name Area 1: Pre-wash
- e
Selection choice: - No
- 1 Block up to 10 Blocks
If a number of blocks are specified then an
area name needs to be given. This can be
done under "Name Area 1". The first
suggestion will appear here for Area 1
"Pre-wash",
for Area 2 "Main wash" and
for Area 3 "Rinses".
See also "Programme structure".
Create ~ Programme header
Area 1: 1 Block
Name Area 1: Pre-wash
- e
The selection and input of Name Area 1 is
the same procedure as for a programme
name.
The procedure for Areas 2 and 3 is the same
as for Area 1.
M.-Nr. 06 533 430
Weigh
By selecting and confirming this option with
the rotary dial you can specifiy how laundry
is to be weighed.
Create ~ Programme header
Weigh: No
Nominal load: 10.0 kg
Selection choice:
-
– No
e
The controls assume that a nominal load is
S A
always present. You cannot enter the weight
manually before starting a programme.
– manual
Laundry can be weighed by hand before
starting a programme.
– automatic
The machine automatically weighs how
-
much laundry is in the drum.
e
S A
Nominal load
By selecting a nominal load you can allocate
a specific laundry weight to the programme.
The max. value will depend on the machine.
Create ~ Programme header
Nominal load: 10.0 kg
Minimum water level: 100 mm
Selection choice:
-
e
S A
Programming
- e
- e
- 0.0 kg, 0.2 kg to 32 kg
-
e
S A
-
e
S A
17