Copy Block - Miele PW 6101 Programming Instructions Manual

Programming

Copy block

This menu option is used for copying a block
from an existing programme to make a new
programme or into part of a programme. A
new block is added to the target
programme.
If there are already 10 blocks in the target
area the 10th block will be overwritten. If a
block is copied into a target area which
does not exist, then the new target area will
automatically be allocated a name.
^ After selecting this option the following will
show in the display:
Copy ~ Block
Source programme: 1 Cottons
Source area: 1 Pre-wash
^ Press the rotary dial, select a source
programme number and then confirm your
selection.
^ Then go to the source area, and select
pre-wash, main wash or rinses and confirm
your selection.
^ Select and confirm the source block option
and then select and confirm the source
block.
Copy ~ Block
Source block: Soak
Target programme: 3 Sleeping bags
Copy ~ Block
Target area: 2nd rinse
Target block: 4
The first programme that has not been
locked or the last one selected will appear
as the target programme number.
^ Select and confirm the target programme
option and then select and confirm the
target programme number.
^ Then select and confirm the target area,
and select pre-wash, main wash or rinses
and confirm your selection.
12
The first free block will appear as the target
block.
^ Select and confirm the target block option
and then select and confirm the target
block.
^ After pressing the S button the copying
procedure will be carried out.
If, when copying, the 10th block needs to be
overwritten, a security message will appear
in the display.
^ After pressing the S button the overwriting
procedure will be carried out and you will
be taken back to the "Copy" sub menu. If
you press the A button or, if you do not
touch any buttons in the next 30 seconds
the copying procedure will not be carried
e
out and you will be taken back to the
S A
"Copy" sub menu.
-
e
S A
-
S A
M.-Nr. 06 533 430